210l steel drums for sale: choosing between two welding machines

Shared operating range

The 1.20-30 liter steel drum fully automatic welding machine and the Export 100-200 Liter large steel drum machine both use the FNBG-1060-I model. Each requires 380V, 50/60Hz power and has a rated capacity of 250KVA. The welding drum diameter range is Φ250 mm to Φ800 mm, and the welding barrel height range is 500 mm to 1500 mm.

Both machines suit ventilation ducts whose length is greater than their diameter, 200-250 liter chemical drums, and oil drums. That application range covers a 210-liter-class workpiece, subject to the finished drum drawing and the machine setup. Both machines have a production capacity of 6-10 pieces per minute and a weld overlap amount of 3-5 mm.

Use those figures to frame the first purchasing discussion. Send the finished diameter, barrel height, required overlap, and planned output so we can match the machine arrangement to the workpiece.

Sheet choices and utility requirements

Both machines weld cold-rolled low-carbon steel sheet, tinplate, stainless steel, and galvanized sheet from 0.5 mm to 1.2 mm thick. For a 200-250 liter drum line, identify the sheet material and thickness before selecting the welding setup.

Each machine needs cooling water at no more than 20 °C and a flow rate of at least 20 L/min. Compressed air pressure must be at least 0.6 MPa, and the copper wire diameter is Φ2.4 mm. Put these connections on the preliminary layout beside the material flow and service area.

Picture a production area preparing sheet for a 210-liter-class drum. Measure the route from sheet preparation to the welder, then reserve access around the cooling-water and compressed-air connections. This helps you check the proposed position against the machine footprint before shipment planning.

Controls and machine interfaces

Both machines use a Mitsubishi PLC and Weilun touch screen. Their pneumatic components are Yadeke, the intermediate relay is Schneider, the inverter is Delta, and the reduction motor is Taiwan Yongkun. These common interfaces give your maintenance team a clear equipment list for electrical and pneumatic planning.

Automatic feeding and welding, PLC control, touch-screen operation, variable-frequency welding power, nitrogen protection, and barrel-mold positioning are part of the operating arrangement for each machine. Welding displacement technology is also used to extend welding-wheel service life.

For operators, the shared arrangement means the purchase decision turns on the workpiece and site fit. For maintenance planning, reserve access to the welding wheel, mold-positioning area, pneumatic components, cooling-water circuit, and electrical control cabinet.

Footprint and maintenance planning

Each machine measures 3800 × 3000 × 2150 mm and weighs 4000 kg. Check the installation area, access route, lifting plan, and floor position against those dimensions and weight. The layout should show the machine, sheet movement, operator position, cooling-water line, and compressed-air connection.

The automatic structure and stated easy-maintenance design suit a line that needs regular access to the welding and positioning areas. Include the wheel, mold, utilities, and control cabinet in the maintenance route instead of placing the machine directly against a wall.

The utility conditions also belong in commissioning checks. Confirm water temperature and flow, then confirm compressed-air pressure before running the welding setup. These checks apply to either machine when producing a 200-250 liter chemical or oil drum.

Which machine fits the purchase?

Choose the 1.20-30 liter machine when your equipment plan uses that product name and you want the stated drum and duct applications around the FNBG-1060-I arrangement. Choose the Export 100-200 Liter machine when your purchasing file is organized around the export-oriented product name and its 200-250 liter chemical and oil drum applications.

The two machines have the same values for model, power supply, rated capacity, workpiece dimensions, overlap, sheet range, output, utilities, controls, dimensions, and weight. Neither has a stated advantage on those comparison points. Your order should therefore follow the drawing, material, utility conditions, and installation route.

For 210l steel drums for sale, send us the finished drum diameter, barrel height, sheet material, sheet thickness, weld overlap, target pieces per minute, and site utility details. We can then confirm the suitable arrangement and interfaces.

Questions that refine the order

Send the drawing before selecting the machine

The 1.20-30 liter machine suits a buyer organizing the line around its broader drum and duct description. The Export 100-200 Liter machine suits a buyer whose purchasing file is centered on 200-250 liter chemical or oil drums. See our automatic steel drum welding machine, then send the drawing, dimensions, material, thickness, output target, and utility details for a quote.